3. Install the display back cover assembly.
4. Install the:
a) eDP cable
b) Display hinges
c) LCD panel
d) display bezel
e) display assembly
f) DC-in cable
g) WLAN card
h) battery
i) base cover
j) microSD card
5. Follow the procedure in After working inside your computer.
System board
Removing the system board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a) microSD card
b) base cover
c) battery
d) WLAN card
e) SSD
f) memory module
g) heat sink
h) fan
i) DC-in
3. Disconnect the following cables and connectors:
Disassembly and reassembly
87
To Next Page
Loading...
