5.
NOTE:
This procedure shows a 3-cell 42 WHr battery removal. The 4-cell 56 WHr battery is slightly bigger in size and
mounts to different mounts on the palmrest.
Remove the single M2.0x3.0 screw [1] and remove the metallic bracket [2] retaining battery to the palmrest.
6. Remove the two M2.0x3.0 screws [3] and separate the battery support bracket [4] from the palmrest.
7. Lift the battery away from the computer.
Disassembly and reassembly
35
To Next Page
Loading...
