4. Rotate the display panel over to the keyboard.
5. Peel off the adhesive tape that secures the low-voltage differential signalling (LVDS) connection to the display
panel.
6. Disconnect the LVDS cable from the display panel.
7. Remove the display panel from the computer.
Installing The Display Panel
1. Connect the display cable to the display panel and attach the adhesive tape to secure the connection.
2. Connect the low-voltage differential signalling (LVDS) cable to the display panel.
3. Replace the adhesive tape that secures the LVDS connection to the display panel.
4. Align the display panel in its original position on the display assembly.
14
To Next Page
Loading...
