b) keyboard
c) hard drive
d) base cover
e) battery
7. Follow the procedures in
After Working Inside Your Computer
Removing The Coin-Cell Battery
1. Follow the procedures in
Before Working on Your Computer
2. Remove:
a) battery
b) base cover
c) keyboard
d) hard drive
e) palmrest
3. Remove the coin-cell connector from the system board and pry out the coin-cell battery.
4. Remove the coin-cell battery from the computer.
Installing The Coin-Cell Battery
1. Insert the coin-cell battery and connect the coin-cell connector to its compartment.
2. Install:
a) palmrest
b) hard drive
c) keyboard
d) base cover
e) battery
3. Follow the procedures in
After Working Inside Your Computer
.
Removing The System Board
1. Follow the procedures in
Before Working on Your Computer
.
2. Remove:
a) battery
b) secure digital (SD) card
c) base cover
d) keyboard
e) memory
21
To Next Page
Loading...
