Installing The Keyboard
1. Connect the keyboard cable to the system board.
2. Insert the keyboard in its compartment.
3. Press down until the keyboard clicks into place in the computer.
4. Install the battery.
5. Follow the procedures in
After Working Inside Your Computer
.
Removing The Palmrest
1. Follow the procedures in
Before Working On Your Computer
.
2. Remove:
a) battery
b) base cover
c) keyboard
d) hard drive
3. Remove the screws from the bottom of the computer, that secures the palmrest.
4. Remove the screws on the palmrest.
16
To Next Page
Loading...
