5. Tighten the screws to secure the display panel to the display assembly.
6. Install:
a) display bezel
b) battery
7. Follow the procedures in
After Working Inside Your Computer
.
Removing The Keyboard
1. Follow the procedures in
Before Working On Your Computer
.
2. Remove the battery.
3. Pry the keyboard using a flat-head screwdriver to remove the keyboard retainers that secure the keyboard to the
computer.
4. Flip the keyboard over and lay it on the palmrest.
5. Lift the clip to release the keyboard cable and disconnect it from the system board.
6. Lift the keyboard up and away from the computer.
15
To Next Page
Loading...
