Option Description
Audio Allows you to enable or disable the
integrated audio controller.
• Enable Audio (Default Setting)
Unobtrusive Mode When enabled, pressing Fn + B will turn
off all light and sound emissions in the
system. Press Fn + B to resume normal
operation.
• Enable Unobtrusive Mode
By default it is disabled.
Miscellaneous Devices Allows you enable or disable the various
on board devices. The options are:
• Enable Microphone
• Enable Hard Drive Free Fall
Protection
• Enable Camera
• Enable Media Card
• Disable Media Card
Default Setting: All devices are enabled.
Table 4. Video
Option Description
LCD Brightness Allows you to set the panel brightness when the ambient sensor is Off.
Table 5. Security
Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password first if an admin password is
used with a system password and/or Hard Drive password
NOTE: Successful password changes take effect immediately.
NOTE: Deleting the admin password automatically deletes the system
password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
System Password Allows you to set, change or delete the system password.
NOTE: Successful password changes take effect immediately.
Default Setting: Not set
Internal HDD-0 Password Allows you to set, change, or delete the administrator (admin) password.
Default Setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
38
To Next Page
Loading...
