Steps
1. Locate the speakers slot on your computer.
2. Align and place the speakers in the slot on your computer.
3. Route the speaker cables through the retention clips on your computer.
Next steps
1. Install the LED board.
2. Install the inner frame.
3. Install the WWAN card.
4. Install the WLAN card.
5. Install the HDD.
6. Install the solid state drive.
7. Install the battery.
8. Install the base cover.
9. Follow the procedure in After working inside your computer.
Heatsink assembly-Discrete
Removing the heatsink assembly-discrete
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
About this task
The figure indicates the location of the Heatsink and provides a visual representation of the removal procedure.
78
Disassembly and reassembly
To Next Page
Loading...
