Figure 3. 6-cell battery
Installing the battery
1. Align the screw holes on the battery with the screw holes on the palmrest assembly [1].
2. Replace the four (M2x3) screws and single (M1.6x4.5) screw that secure the battery to the palmrest assembly [2].
NOTE:
Install the extra M2x4 screw for 6-cell battery. The screw is shown in green, in the battery disassembly
section.
3. Stick the tape on wireless antennae cable securing it to the battery [1].
64
Removing and installing components
To Next Page
Loading...
