3. Remove the display bezel from the display assembly.
Installing the Display Bezel
1. Place the display bezel on the display assembly.
2. Starting from the top corner, press on the display bezel and work around the entire bezel until it
clicks on to the display assembly.
3. Follow the procedures in After Working Inside Your Computer.
Removing the Display Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
a. base cover
b. battery
c. display bezel
3. Remove the screws that secure the display panel to the display assembly [1] and lift to flip the display
panel to access the eDP cable [2].
30
To Next Page
Loading...
