Steps
1. Align and insert the speaker into the slot and press it until the release tab clicks.
2. Connect the speaker cable to the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in after working inside your computer.
Processor
Removing the processor
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the speaker .
4. Remove the fan assembly.
5. Remove the heat sink.
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
Removing and installing components
39
To Next Page
Loading...
