7. Press the speaker securing tab, and slide the speaker towards the right of the computer to release it.
8. Remove the speaker from the chassis.
Related Links
Installing the Internal Speaker
Installing The Speaker
1. Place the speaker on the appropriate location of the chassis rear.
2. Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it.
3. Thread the internal speaker cable into the fan shelter clip.
4. Connect the speaker cable to the system board.
5. Install the drive cage.
6. Install the front bezel.
7. Install the cover.
8. Follow the procedures in After Working Inside Your Computer.
Related Links
17
To Next Page
Loading...
