10. Follow the procedures in After Working Inside Your Computer.
Related Links
Removing the Power Supply
Removing the System Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Remove the front bezel.
4. Remove the drive cage.
5. Remove the expansion cards.
6. Remove the heat sink and processor.
7. Remove the fan shelter.
8. Disconnect all the cables connected to the system board, and move the cables away from the chassis.
9. Lift and release the expansion-card latch, to gain access to the screws securing the system board.
10. Remove the screws that secure the system board to the chassis.
28
To Next Page
Loading...
