Image Server
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Lookup
Method" is set to "Static IP".
ImageServer Port Specifies the primary IP port of the ImageServer with which the client communicates.
The default IP port is 06910.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer".
Client DHCP Specifies how the client obtains the IP address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer".
Client IP Specifies the static IP address of the client. The default IP address is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP" is
set to "Static IP".
Client Subnet Mask Specifies the subnet mask of the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP" is
set to "Static IP".
Client Gateway Specifies the gateway IP address for the client. The default setting is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enabled with ImageServer" and when "Client DHCP" is
set to "Static IP".
License Status Displays the current license status.
System Logs
BIOS Events Displays the system event log and allows you to:
• Clear Log
• Mark all Entries
40
To Next Page
Loading...
