4. Place the metal tab on the system board and tighten the screw to secure the metal tab to the system
board.
5. Install the:
a. processor
b. heat sink
c. system fan
d. VGA board
e. hard drive assembly
f. cover
6. Follow the procedure in After Working Inside Your Computer.
System board layout
1. Processor 2. CPU fan connector
3. Internal speaker connector 4. Memory module connectors
5. USB 3.0 connector 6. Intrusion switch
7. USB 3.0 connector 8. Line out connector
9. Universal audio jack 10. M.2 socket1 connector
11. Power switch 12. Hard drive connector
19
To Next Page
Loading...
