Dell OptiPlex 3040M Series - Removing and Installing Components; Computer Cover Procedures

2
Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Recommended tools
The procedures in this document require the following tools:
• Small flat blade screwdriver
• Phillips screwdriver
• Small plastic scribe
Removing the cover
1. Follow the procedure in Before Working Inside Your Computer.
2. To remove the cover:
a. Remove the screw that secures the cover to the computer [1].
b. Slide the cover to release it from the computer [2].
NOTE: You may need a plastic scribe to release the cover from the edges.
c. Lift and remove the cover from the computer [3].
8