Dell OptiPlex 390 - Page 64

Image Server
Lookup Method Specifies how the ImageServer looks up the server address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
with ImageServer".
ImageServer IP Specifies the primary static IP address of the ImageServer with
which the client software communicates. The default IP
address is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
with ImageServer" and when "Lookup Method" is set to
"Static IP".
ImageServer Port Specifies the primary IP port of the ImageServer with which the
client communicates. The default IP port is 06910.
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
with ImageServer".
Client DHCP Specifies how the client obtains the IP address.
• Static IP
• DNS (enabled by default)
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
with ImageServer".
Client IP Specifies the static IP address of the client. The default IP
address is 255.255.255.255.
NOTE: This field is only relevant when the "Integrated NIC"
control in the "System Configuration" group is set to "Enabled
with ImageServer" and when "Client DHCP" is set to "Static
IP".
Client Subnet Mask Specifies the subnet mask of the client. The default setting is
255.255.255.255.
64