Dell OPTIPLEX 9010 ALL-IN-ONE - Detailed Engineering Specifications; System Dimensions (Physical), System Board Connector Maximum Allowable Dimensions

DELL™ OPTIPLEX™ 9010 ALL-IN-ONE TECHNICAL GUIDEBOOK
13
DETAILED ENGINEERING SPECIFICATIONS
SYSTEM DIMENSIONS (PHYSICAL)
NOTE: System Weight and Shipping Weight is based on a typical confi guration and may vary based on PC
confi guration. A typical confi guration includes: integrated graphics, one hard drive, one optical drive.
SYSTEM BOARD CONNECTOR MAXIMUM ALLOWABLE DIMENSIONS
AIO
Chassis Weight w/o stand (pounds / kilograms) 16.8 / 7.6
Chassis Dimensions (system w/o stand): (HxWxD)
Height (inches / centimeters) 15.2 / 38.6
Width (inches / centimeters) 22.6 / 57.4
Depth (inches / centimeters) 2.7 / 6.8
Basic Stand Dimensions
Footprint (inches / centimeters square) 8.7 / 22
Weight (pounds / kilograms) 5.3 / 2.4
Packaging Parameters (HxWxD—includes basic stand)
Height (inches / centimeters) 27.27 / 69.28
Width (inches / centimeters) 14.05 / 35.68
Depth (inches / centimeters) 23.37 / 59.37
Shipping Weight (pounds / kilograms - includes packaging
materials)
28.5 / 12.9
AIO
Mini PCIe x1 Slot (Voltage supported 3.3V/5V/12V/-12V) 1.5V/3.3V
Width (inches/centimeters) 1.18/3
Length (inches/centimeters) 1.06/2.68
Maximum Wattage 4.2W