Dell OPTIPLEX 9010 ALL-IN-ONE - Communications

DELL™ OPTIPLEX™ 9010 ALL-IN-ONE TECHNICAL GUIDEBOOK
17
COMMUNICATIONS - NETWORK ADAPTER (NIC)
INTEGRATED INTEL® 82579 GIGABIT1
AIO
External Connector Type RJ45
Data Rates supported 10/100/1000 Mbps
1
Controller Details
Controller bus architecture PCIe-based interface for S0 state, SMBus for Sx low power state
Integrated memory N/A
Data transfer mode (example Bus-Master DMA) N/A
Power consumption (full operation per data rate connection
speed)
711mW (Max.)
Power consumption (standby operation) 227mW (Max.)
IEEE standards compliance (example 802.1P) 802.3
Hardware Certifi cations (example FCC, B, GS mark…) N/A
Boot ROM Support EEPROM (located in SPI)
Network Transfer Rate (example 10BASE-T (half-duplex) 10
Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
10 Mb (full/half-duplex)
100 Mb (full/half-duplex)
1000 Mb (full-duplex)
Operating temperature 0° C to 85° C (32° F to 185° F)
Operating humidity 20% to 80% (non-condensing)
Operating System Driver Support Windows 7 32/64, Windows XP 32/64, Vista 32/64
Manageability (examples WOL, PXE) WOL, PXE 2.1
Management Capabilities Alerting Intel® Standard Manageability, Intel Core 2 Duo/Quad Proces-
sor with vPro Technology
Network Transfer Mode (example Full Duplex, Half Duplex)
1
This term does not connote an actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and
network infrastructure is required.