Dell OPTIPLEX 9010 ALL-IN-ONE - Removing and Installing Components; Recommended Tools for Component Service; Removing the VESA Stand

DELL™ OPTIPLEX™ 9010 ALL-IN-ONE TECHNICAL GUIDEBOOK
9
DRIVES AND REMOVABLE STORAGE
SYSTEM BOARD CONNECTORS
NOTE: See Detailed Engineering Specifi cations for maximum card dimensions.
1
For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.
2
Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
3
DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.
4
miniPCIe (Support Standard Rev 2.0)
5
Serial ATA ( 2 ports Support Standard Rev 3.0, the rest of ports Support Standard Rev 2.0)
AIO
Bays:
5.25-inch Optical Bay Supported (External) 0
Optical Drives Supported (maximum) 1
Hard Drive Bay Supported (Internal) 1
Hard Drives Supported 3.5”/2.5” (maximum) 1/1
Interface:
SATA 2.0 0
SATA 3.0 2
3.5” Hard Drives:
1TB
1
SATA 7200 RPM HDD X
500GB
1
SATA 7200 RPM HDD X
250GB
1
SATA 7200 RPM HDD X
2.5” Hard Drives:
128GB
1
SATA Solid State drive X
320GB
1
SATA 7200 RPM SED HDD X
500GB
1
SATA 7200 RPM Hybrid HDD 16MB cache X
Optical Drive:
Blu-ray Writer SATA X
DVD+/-RW
2
SATA X
DVD-ROM
3
SATA X
Media Card Reader:
Dell 8 in 1 Media Card Reader X
AIO
Mini PCIe connector
4
1
Serial ATA (SATA) connector
5
2