DELL™ OPTIPLEX™ 9010 ALL-IN-ONE TECHNICAL GUIDEBOOK
15
POWER
NOTE: This machine utilizes a more e cient Active Power Factor Correction (APFC) power supply. Dell recom-
mends only Universal Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation of a
Sine Wave, Square Wave, or quasi-Square Wave. If you have questions, please contact the manufacture to confi rm
the output type.
AIO
Power Supply Wattage 200W High Eciency
AC input Voltage Range 90 – 264Vac
AC input current (low ac range/high AC range) 2.9A / 1.45A
AC input Frequency 47 – 63 Hz
AC holdup time (80% load) 16 mini sec
Average Eciency (Energy Star 5.0 Compliant) 87 – 90 – 87% @ 20 – 50 – 100% load
Typical Eciency (Active PFC) N/A
DC parameters
+3.3v output N/A
+5.0v output N/A
+12.0v output . +12VA – 9.5A & +12BB – 7.2A
Note: +12VB Rated at 0.4A when in Standby Mode.
+5.0v auxiliary output N/A
-12.0v output N/A
Max total power 200W
Max combined +3.3v / +5.0v power N/A
Max combined 12.0v power (note: only if more than one 12v
rail)
200W
BTUs/h (based on PSU max wattage) 682 BTU
Power Supply Fan N/A
Compliance:
Erp Lot6 Tier 2 0.5watt requirement Yes
Climate Savers / 80Plus Compliant Yes
FEMP Standby Power Compliant Yes
CECP Compliant Yes
To Next Page
Loading...
