EasyManua.ls Logo

Dell OPTIPLEX 9010 ALL-IN-ONE - Page 23

Dell OPTIPLEX 9010 ALL-IN-ONE
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DELL™ OPTIPLEX™ 9010 ALL-IN-ONE TECHNICAL GUIDEBOOK
23
1
For hard drives, GB means 1 billion bytes ; actual capacity varies with preloaded material and operating environment and will be less.
HARD DRIVES
1
(CONT.)
2.5” 128GB
1
SATA SOLID STATE DRIVE
AIO
Capacity (GB) 128
Dimensions inches (W x D x H) Approximately 2.75 x 3.94 x 0.374 inches
Interface type and Maximum speed Up to 6Gb/s (SATA 3.0)
MTBF 1M hours
Average Seek Time n/a
Logical Blocks 250,069,680 / 500,118,192
Power Source
Power Consumption (reference only) Idle 0.145W, Active 1.95W
Spin Up Current (reference only) 5V (1000mA)
Environmental Operating Conditions (Non-Condensing):
Temperature Range 0°C to 70°C
Relative Humidity Range 10 to 90%
Maximum Wet Bulb Temperature 29°C
Altitude Range -200 to 5,000 m
Op Shock (@0.5ms) 1,500G
Temperature Range -55°C to 95°C
Relative Humidity Range 5 to 95%
Maximum Wet Bulb Temperature 38°C
Altitude Range -200 to 10,600 m
Environmental Non-Operating Conditions (Non-Condensing):

Other manuals for Dell OPTIPLEX 9010 ALL-IN-ONE

Related product manuals