Dell OptiPlex GX520 - Page 167

Back to Contents Page
Dell™OptiPlex™GX520User'sGuide
Removing the Computer Cover
Removing the Computer Cover



1. Follow the procedures in "Before You Begin."

2. If you have installed a padlock through the padlock ring on the back panel, remove the padlock.

3. Slide the release latch back as you lift the cover.

4. Pivot the cover up using the hinge tabs as leverage points.

5. Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.
Back to Contents Page

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
NOTICE: Ensure that there is sufficient space to support the open cover—at least 30 cm (1 ft) of desk top space.
1
security cable slot
2
cover release latch
3
computer cover