Dell OptiPlex GX520 - Removing the Computer Cover

Back to Contents Page
Dell™OptiPlex™GX520User'sGuide
Removing the Computer Cover
Removing the Computer Cover



1. Follow the procedures in "Before You Begin."

2. Lay the computer on its side.

3. Slide the cover release latch back as you lift the cover.

4. Grip the sides of the computer cover and pivot the cover up using the hinge tabs as leverage points.

5. Remove the cover from the hinge tabs and set it aside on a soft nonabrasive surface.
Back to Contents Page

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
1
security cable slot
2
cover release latch
3
padlock ring