Dell OptiPlex GX520 - Jumper Settings


Jumper Settings
Back to Contents Page

4
memory module connectors (DIMM_1, DIMM_2)
15
PCI connector (SLOT2)
5
serial ATA drive connectors (SATA0, SATA2)
16
PCI connector (SLOT3)
6
front-panel connector (FNT_PANEL)
17
serial connector (SER2)
7
CD drive analog audio cable connector for optional analog audio cable (CD_IN)
18
floppy drive connector (DSKT)
8
power connector (POWER)
19
standby power indicator (AUX_PWR)
9
CD/DVD drive connector (IDE)
20
system board speaker (BEEP)
10
RTC reset jumper (RTCRST)
21
internal speaker (INT_SPKR)
11
chassis manual voltage-selection switch connector (INTRUDER)



Mini Tower Computer

Jumper

Setting

Description
PSWD
Password features are enabled (default).
Password features are disabled.
RTCRST
The real-time clock has not been reset.

The real-time clock is being reset (jumpered temporarily).
jumpered unjumpered