Dell OptiPlex GX520 - Page 93


4. Attach the power and floppy-drive cables to the floppy drive.

5. Replace the computer cover.

6. Enter system setup and use the Diskette Drive option to enable your new floppy drive.

7. Verify that your computer works correctly by running the Dell Diagnostics.

CD/DVD Drive



Removing a CD/DVD Drive

1. Follow the procedures in "Before You Begin."

1
floppy drive
2
shoulder screws (4)
3
shoulder screw slots (2)
1
power cable
2
floppy-drive cable
3
floppy-drive connector (DSKT)
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.