Dell OptiPlex XE - Removing the Back Plate

Back to Contents Page
Back Plate
Dell™OptiPlex™XEServiceManual—Desktop
Removing the Back Plate
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the expansion card(s).
3. Lift and remove the back plate from the chassis.
Replacing the Back Plate
To replace the back plate, perform the above steps in reverse order.
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe®Flash®Player from Adobe.com in order to view the illustrations below.