4. Install the heat sink.
5. Install the WWAN card.
6. Install the WLAN card.
7. Install the memory module.
8. Install the solid-state drive.
9. Install the base cover.
10. Install the microSD card.
11. Install the SIM card.
12. Follow the procedure in After working inside your computer.
Power-button board
Removing the power-button board
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
5. Remove the solid-state drive.
6. Remove the memory module.
7. Remove the WLAN card.
8. Remove the WWAN card.
9. Remove the heat sink.
10. Remove the battery.
11. Remove the system fan.
12. Remove the assembly inner frame.
13. Remove the system board.
About this task
The following images indicate the location of the power-button board and provide a visual representation of the removal
procedure.
Removing and installing components
61
To Next Page
Loading...
