Table 32. BIOS Setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Sets the operating mode of the integrated SATA hard drive controller.
By default, the AHCI/NVMe option is selected. The storage device is configured
for AHCI/NVMe mode.
Storage Interface Displays the information of various onboard drives.
Port Enablement Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD option is enabled.
SMART Reporting
Enable SMART Reporting Sends analytical information from integrated drives and notifications during
startup about potential failure of the hard drive to the BIOS. Controls whether
hard drive errors for integrated drives are reported during system startup.
This technology is part of the SMART (Self-Monitoring Analysis and Reporting
Technology) specification.
By default, the Enable SMART Reporting option is disabled.
Drive Information Displays the information of onboard drives.
Enable MediaCard
Secure Digital (SD) Card Enables or disables the SD card.
By default, the Secure Digital (SD) Card option is enabled.
Secure Digital (SD) Card Read-Only Mode Enables or disables the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is disabled.
Table 33. BIOS Setup options—Display menu
Display
Display Brightness
Brightness on battery power Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
Brightness on AC power Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
Touchscreen Enables or disables the touch screen option.
By default, the Touchscreen option is enabled.
EcoPower
Enable EcoPower Enables or disables the EcoPower feature of the panel. EcoPower increases the
battery life by reducing the display brightness when appropriate.
By default, the Enable EcoPower option is enabled.
Full Screen Logo Enables or disables the computer to display a full-screen logo, if the image
matches screen resolution.
By default, the Full Screen Logo option is disabled.
90 BIOS Setup
To Next Page
Loading...
