Setting up the monitor | 31
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turn o your computer.
2. Connect the HDMI, DP or USB type-C cable from your monitor to thecomputer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: P3221D default setting is DP 1.2. A DP 1.1 Graphic card
may not display normally. Please refer to “product specific problems – No
image when using DP connection to the PC” to change default setting.
Connecting the HDMI cable
HDMI
HDMI
To Next Page
Loading...
