About your monitor | 9
Back view
8
3
5
4
6
2
1 7
Label Description Use
1 Joystick Use it to control the OSD menu.
2 Power on/off button To turn the monitor on or off.
3 Barcode, serial number, and
Service Tag label
Refer to this label if you need to contact
Dell for technical support.
4 Stand release button Release stand from monitor.
5 Regulatory label Lists the regulatory approvals.
6 VESA mounting holes (100 mm x
100 mm-behind attached VESA
cover)
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x 100
mm).
7 Dell soundbar mounting slots Attaches the optional Dell soundbar.
8 Cable management slot Use to organize cables by placing them
through the slot.
To Next Page
Loading...
