Replacing the palm-rest and antenna
assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
Place the palm rest on a flat surface.
Post-requisites
1. Replace the power button with fingerprint reader.
2. Replace the keyboard.
3. Replace the system board.
4. Replace the display assembly.
5. Replace the speakers.
6. Replace the touch pad.
41
86 Replacing the palm-rest and antenna assembly
To Next Page
Loading...
