Next steps
1. Replace the WLAN.
2. Replace the battery.
3. Replace the base cover.
4. Replace the SD memory card.
5. Follow the procedure in after working inside your computer.
Display bezel
Removing the display bezel
Prerequisites
1. Follow the procedure in before working inside your computer
2. Remove the
SD memory card
3. Remove the base cover
4. Remove the
battery
5. Remove the WLAN
6. Remove the
display assembly
Steps
1. Push both sides of the display-hinge cover and lift it from the display back-cover.
2. Pry the inner edges of the display bezel.
88 Removing and installing components
To Next Page
Loading...
