PowerConnect 5500 Series Release Notes
System Firmware Version 4.1.0.16 Subject to Change Without Notice Page 9
Link issues between PC5548 and
e6320 (Dell) laptop (EEE
interoperability on Intel NIC)
Link cannot be established
When EEE is disabled –
Switch does not advertise
EEE capability.
When EEE is enabled –
user can determine if to
work in Auto-Negotiation
slave mode to overcome
PC55xx Port-channel inconsistent
configuration in general mode
1. Whenever port is in general mode and bind
to VLAN, an error message is present when
trying to remove the port from the VLAN
2. When creating a range of VLANs, specific
VLAN 3664 cannot be created.
Whenever trying to create this specific VLAN
3664 after the failure, it still cannot be created.
1. Removed the error
message
2. All VLANs in any range
or combination is being
created.
PC55xx - FATAL ERROR and
crash when changing port mode.
When changing the port mode to access or
general, the switch crashed
Fixed the problem
PC55xx v4.0.1.0 LAG issue using
10Gb interfaces
When using the XG ports with SFP of 1G, can
join both ports as uplink LAG Po1.
- If reloading the device, XG port 1/0/2 cannot
come up.
- If replacing one of the 1G SFP with 10G SFP
+, the device will allow such an illegal behavior
Port-Channel speed is
based on the physical ports
speed that are members of
the Port-Channel
PC55xx Unable to reach Storm
Control page via GUI (Japanese
Internet Explorer)
When IE is in Japanese – Strom Control page
is missing
Fixed the problem and
verified that other web
pages doesn’t suffer from
the same problem
55xx - Cannot modify port
description in GUI on active fiber-
optic interface
Cannot modify port description in GUI on
active fiber-optic interface
Fixed the problem
To Next Page
Loading...
