PowerConnect 5500 Series Release Notes
System Firmware Version 4.1.0.16 Subject to Change Without Notice Page 10
PC55xx - show clock detail output
different to user manual
Show clock in the device showed Summer
time range in dates instead of words
Fixed the code to match the
User Guide
Incorrect OID returned on
SNMPGetNext 55xx
When using the SNMP GetNext on
1.3.6.1.2.1.2.2.1.1.1.9999 the incorrect OID is
returned
Fixed the problem
PC55xx - SNMP ifType value of 6
for port-channel interfaces
ifType for Post-Channels is the same as for
regular interfaces
Updated the MIB
information to comply
newer iANAifType definition
GUI shows a fan led in red which
does not match the physical
status of the front led
Once the switch temperature goes below 40
degrees, the GUI shows a fan led in red which
does not match the physical status of the front
led
GUI now shows the right
status of the LED
PC55xx Connectivity issues with
fixed port setting and stacking.
Use 2 PC55xx switches as stack and with
fixed port setting 100 Full. for example 1/0/1
and 2/0/1
After remove/power of the master unit, the
fixed port (gi2/0/1) did not do a linkup, but the
LED is on.
Fixed the problem
PC55xx switch crashed on
snmpgetnext
1.3.6.1.4.1.89.59.2.3.1.9.2.2
Device crashed when using snmpgetnext of
1.3.6.1.4.1.89.59.2.3.1.9.2.2
Fixed the problem
To Next Page
Loading...
