PowerConnect B-Series FCX Web Management Interface User Guide 85
53-1002268-01
Configuring a TACACS/TACACS+ server
4
FIGURE 66 Configuring management authentication
The Login Authentication Sequence display the following information.
Click Add to display the current authentication method that is configured, as shown in Figure 67.
Type Specifies the type of authentication to be used
• Login
• Enable
• Web Server
• SNMP Server
Add Enables to add the authentication methods.
Delete Enables to delete the added methods.
Show Sequence Displays the list of authentication methods added.
To Next Page
Loading...
Need help?
General