Installing the Tower-to-Rack and Rack-to-Tower Kits 9
Figure 1-4. Removing the Right-Side Cover
2
Install the rack-adapter plate:
a
Align the 12 securing tabs on the rack-adapter plate with the 12 securing slots on the
chassis. See Figure 1-5.
b
Slide the rack-adapter plate toward the front of the system.
c
Replace the two back-panel screws to secure the rack-adapter plate to the chassis.
Figure 1-5. Installing the Rack-Adapter Plate
right-side cover
back-panel
screws (2)
securing slots (12)
rack-adapter
plate
back-panel
screws (2)
P2648bk0.book Page 9 Thursday, October 14, 2004 11:18 AM
To Next Page
Loading...
