Dell PowerEdge 1800 - Removing the Slide-Shoulder Screws; Rack-To-Tower Kit Contents

12 Installing the Tower-to-Rack and Rack-to-Tower Kits
www.dell.com | support.dell.com
Figure 1-8. Rack-to-Tower Kit Contents
Removing the Slide-Shoulder Screws
Remove the three slide-shoulder screws from each side of the chassis. See Figure 1-9.
Figure 1-9. Removing the Slide-Shoulder Screws
stabilizer feet (4)
system side cover
stabilizer-foot
swivel disks (4)
stabilizer-foot
securing screws (4)
slide-shoulder screws (6)
P2648bk0.book Page 12 Thursday, October 14, 2004 11:18 AM