Dell PowerEdge C6100

Using the Baseboard Management Controller 19
Get Message Buffer Flags App 31H M Yes
Enable Message Channel Receive App 32H O Yes
Get Message App 33H M Yes
Send Message App 34H M Yes
Read Event Message Buffer App 35H O Yes
Get System Interface Capabilities App 57H M Yes
Get BT Interface Capabilities App 36H M No
Master Write-Read App 52H M Yes
Get System GUID App 37H O Yes
Set System Info Parameters App 58H O Yes
Get System Info Parameters App 59H O Yes
Get Channel Authentication Capabilities App 38H O Yes
Get Channel Cipher Suites App 54H M Yes
Get Session Challenge App 39H O Yes
Activate Session App 3AH O Yes
Set Session Privilege Level App 3BH O Yes
Close Session App 3CH O Yes
Get Session Information App 3DH O Yes
Get Authentication Code App 3FH O Yes
Set Channel Access App 40H O Yes
Get Channel Access App 41H O Yes
Get Channel Info App 42H O Yes
Set Channel Security Keys App 56H M Yes
Set User Access App 43H O Yes
Get User Access App 44H O Yes
Set User Name App 45H O Yes
Get User Name App 46H O Yes
Set User Password App 47H O Yes
Table 1-11. BMC Messaging Support
Commands (NETFUN: 06H, 07H)
Commands NetFn CMD O/M Supported