122 Managing Your Remote Console Switch Using the On-board Web Interface
Figure 6-15. Upgrade SIP Firmware Window
4
Click
Upgrade
. The
Upgrade
button dims. The Last Status column will
display either In Progress or Succeeded, depending on the status of each
SIP upgrade. A firmware upgrade currently in progress message displays
until all of the selected SIP types are upgraded.
5
When complete, a message appears prompting you to confirm the upgrade
completion. Once confirmed, the
Upgrade
button is again enabled.
6
Click
Close
to exit the
Upgrade Firmware
window.
To upgrade SIP firmware individually:
1
Click the
Configure
tab in the on-board web interface.
2
Select the
SIPs
sub-category under
Versions
in the left column.
3
Click the
EID
of the SIP for which you wish to view firmware information.
The SIP Version window opens.
To Next Page
Loading...
