Figure 87. Cabling diagram—Eight 2.5-inch SAS/SATA backplane with PERC card
1.
power interposer board (PIB) 2. Connector A on the PERC card
3. Connector B on the PERC card 4. PERC card
5. signal cable connector on the system board 6. optical drive power cable connector on the system
board
7. system board 8. optical drive SATA connector on the system board
9. backplane 10. SAS B connector on the backplane
11. SAS A connector on the backplane 12. optical drive
13. power cable connector on the backplane 14. signal cable connector on the backplane
125
To Next Page
Loading...
