Dell PowerEdge R410 - 4 Mechanical; Chassis Description; Dimensions and Weight; Figure 1. System Dimensions

Dell
PowerEdge R410 Technical Guide 14
4 Mechanical
4.1 Chassis Description
The Dell™ PowerEdge™ R410 chassis design provides customers low-cost compute power with some
hardware redundancy ability. It is a new chassis design for two incoming chassis offering cabled hard
drives with LED module, and high-availability features such as hot-plug hard drives and LCD module.
Features include four 3.5” SATA or SAS hard drives (cabled or hot-swap), power supply (non-
redundant or redundant), dual Gigabit LOMs without TOE acceleration, four DIMM slots support each
CPU, TPM, one riser card for optional PCIe expansion card, optional iDRAC6 Enterprise and iDRAC6
Express card mounted on planar without PCI slot occupied, and support eleventh generation slim
static and slim sliding rails.
4.2 Dimensions and Weight
Figure 1 Details the dimensions of the PowerEdge R410 chassis. The maximum configuration weight is
15.9 kg (35.02 lb).
Xa
(width
with rack
latches)
Xb
(width
without
rack
latches)
Y
(Height)
Za
(depth
with
bezel)
Za
(depth
without
bezel)
Zb
(depth
without
power
supply and
bezel)
Zc
(depth
with
power
supply)
482.4mm 434.0mm 43.0mm 35.0mm 20.1mm 606.0mm 641.9mm
Figure 1. System Dimensions