Dell PowerEdge R410 - NIC Indicators; Rails and Cable Management; Readyrails Sliding Rails; Readyrails Static Rails

Dell
PowerEdge R410 Technical Guide 16
Figure 6. Back View With Non-redundant Power Supply
4.5 NIC Indicators
See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge R410
Hardware Owner’s Manual on Support.Dell.com/Manuals
for more information.
4.6 Rails and Cable Management
4.6.1 ReadyRails Sliding Rails
ReadyRails
TM
Sliding Rails for 4-post racks support includes:
• Tool-less installation in 19” EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks
• Tooled installation in 19” EIA-310-E compliant threaded hole 4-post racks (requires the 1U
Threaded Rack Adapter Brackets Kit)
• Full extension of the system out of the rack to allow serviceability of key internal components
• Optional cable management arm (CMA)
Rail depth and adjustment ranges are as follows:
• Rail depth without the CMA: 714 mm
• Rail depth with the CMA: 835 mm
• Square-hole rack adjustment range: 686-883 mm
• Round-hole rack adjustment range: 672-876 mm
• Threaded-hole rack adjustment range: 651-897 mm
4.6.2 ReadyRails Static Rails
ReadyRails
TM
Static Rails for 4-post and 2-post racks support:
• Tool-less installation in 19” EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks
• Tooled installation in 19” EIA-310-E compliant threaded hole 4-post and 2-post racks
Rail depth and adjustment ranges are as follows:
• Rail depth: 622 mm
• Square-hole rack adjustment range: 608-879 mm
• Round-hole rack adjustment range: 594-872 mm
• Threaded-hole rack adjustment range: 604-890 mm
See Section 14, Rack Information, for more information.