Dell PowerEdge R410 - 12 Storage; Overview with Description; RAID Configurations; Table 8. Factory RAID Configurations

Dell
PowerEdge R410 Technical Guide 32
12 Storage
12.1 Overview with Description
The Dell™ PowerEdge™ R410 supports 4 hard drives in one of the following configurations:
• Four 3.5” cabled or hot-swap SAS or SATA
• Four 2.5” hot-swap SAS or SATA or SSD
The 2.5” hard drive option requires a hot-swap configuration with the 3.5” carrying tray and the
retention kit.
12.2 RAID Configurations
Table 8 lists the factory RAID configurations for the R410.
Table 8. Factory RAID Configurations
Cabled/Hot-
swap
Configuration
Type
Configurations Description
Min.
Hard
Drives
Max.
Hard
Drives
Cabled No hard drive C0A NCZCBL
No hard drive, cabled
hard drive chassis
0 0
Hot-swap No hard drive C0B NCZ
No hard drive,
hot-swap drive chassis
0 0
Cabled
Embedded
SATA
C1 MSTCBL
On-board SATA
Controller (ICH10R)
1 4
Cabled
SAS/SATA—no
RAID
C2 ASSCBL
Add-in SAS/SATA RAID
card, No RAID
(SAS 6/iR)
1 4
Cabled
SAS/SATA—
RAID0
C3 ASSR0CBL
Add-in SAS/SATA RAID
card, RAID 0 (SAS 6/iR
or PERC 6/i)
1 4
Cabled
SAS/SATA—
RAID1
C4 ASSR1CBL
Add-in SAS/SATA RAID
card, RAID 1 (SAS 6/iR
or PERC 6/i)
2 2
Cabled
SAS/SATA—
RAID5
C5 ASSR5CBL
Add-in SAS/SATA RAID
card, RAID 5 (PERC 6/i)
3 4
Cabled
SAS/SATA—
RAID6
C6 ASSR6CBL
Add-in SAS/SATA RAID
card, RAID 6 (PERC 6/i)
4 4
Hot-swap
SAS/SATA/SSD
—no RAID
C7 ASS
Add-in SAS/SATA RAID
card, No RAID (SAS
6/iR)
1 4