Dell PowerEdge R410 - Processor Configurations; Additional Processor Information

Dell
PowerEdge R410 Technical Guide 23
Processor Model and Features DDR3 Memory Bus Speed TDP Power
Intel Xeon E5645 2.40GHz, 12M cache, 5.86 GT/s QPI,
Turbo, HT
1066MHz
80W
Intel Xeon E5606 2.13GHz, 8M cache, 4.8 GT/s QPI 1066MHz 80W
Intel Xeon E5603 1.60GHz, 4M cache, 4.8 GT/s QPI 1066MHz 80W
The following describe the processor features:
• QPI: Quick Path Interconnect is a point-to-point processor interconnect developed by Intel to
compete with AMD's Hyper Transport; it is defined using Gigatranfers (GT/s) per second
referring to a number of data transfers or operations
• Turbo: Feature that increases the speed of the processor on demand (from OS) if the
processor is operating below power/thermal specifications
• DDR-3 Memory bus speed: 800 MHz, 1066 MHz, or 1333 MHz
• HT: Intel Hyper-threading technology
6.2 Processor Configurations
The R410 operates with a single processor or dual processors. However, because the memory
controller is embedded in the processor when only one processor is installed in the system, it
supports 4 DIMMs, minimum 1 GB and maximum 32 GB. When two processors are installed in the
system, it supports 8 DIMMs, minimum 2 GB and maximum 64 GB.
6.3 Additional Processor Information
Refer to the Processors section in the Installing System Components chapter of the Dell PowerEdge
R410 Systems Hardware Owner’s Manual on Support.Dell.com/Manuals
for additional processor
information.