Dell PowerEdge R410 - 11 PCI Slots; Overview; Nics and External Controller Cards

Dell
PowerEdge R410 Technical Guide 31
11 PCI Slots
11.1 Overview
Dell™ PowerEdge™ R410 supports one x16 Gen1 or Gen2 PCIe expansion card. The expansion slot
supports full-height, half-length cards that are not hot-swappable. There is a second slot on the riser
card dedicated for SAS 6/iR modular. Other than SAS 6/iR modular, no other cards should be
installed in this slot.
For more information on installing expansion cards and expansion-card priority, see the Expansion
Cards section in the Installing System Components chapter of the Dell PowerEdge R410 Systems
Hardware Owner’s Manual on Support.Dell.com/Manuals
.
11.2 NICs and External Controller Cards
For information on supported NICs and external controller cards, see the Expansion Cards and
Expansion-Card Risers chapter of the PowerEdge R410 Hardware Owner’s Manual on
Support.Dell.com/Manuals
.