Troubleshooting Your System 153
3
Disassemble components from the system. See "Installing System
Components" on page 79.
• System board shroud
• Power distribution board shroud
• Hard drives
• VFlash SD cards
• USB memory keys
• NIC hardware key
•Expansion card
• Integrated storage card
•iDRAC6 Express card
•iDRAC6 Enterprise card
• Power supplies
•Fans
• Processors and heat sinks
•Memory modules
4
Let the system dry thoroughly for at least 24 hours.
5
Reinstall the components you removed in step 3.
6
Close the system. See "Closing the System" on page 83.
7
Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
If the system does not start properly, see "Getting Help" on page 181.
8
If the system starts properly, shut down the system and reinstall all of the
expansion cards that you removed. See "Installing an Expansion Card" on
page 101.
9
Run the appropriate online diagnostic test. See "Using Dell Diagnostics"
on page 169.
If the tests fail, see "Getting Help" on page 181.
R415HOM.book Page 153 Friday, September 24, 2010 9:37 AM
To Next Page
Loading...
