Dell PowerEdge R415 - Front Bezel (Optional)

Installing System Components 81
Front Bezel (Optional)
Removing the Front Bezel
1 Unlock the keylock at the left end of the bezel.
2 Lift up the release latch next to the key lock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from
the system. See Figure 3-2.
Figure 3-2. Removing and Replacing the Front Bezel
Installing the Front Bezel
1 Hook the right end of the bezel onto the chassis.
2 Fit the free end of the bezel onto the system.
3 Secure the bezel with the keylock. See Figure 3-2.
1 release latch 2 keylock
3 bezel 4 hinge tab
3
2
1
4
R415HOM.book Page 81 Friday, September 24, 2010 9:37 AM