Dell PowerEdge R415 - Page 37

About Your System 37
E2021 Incorrect
memory
configuration.
Review User
Guide.
Incorrect memory
configuration.
Check screen for specific
error messages. See
"Troubleshooting System
Memory" on page 157.
E2022 General
failure
during POST.
Check screen
message.
General failure after video. Check screen for specific
error messages.
E2026 Memory
initialization
error. Contact
support.
Invalid memory
configuration.
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory
Module Installation
Guidelines" on page 122.
See "Getting Help" on
page 181.
E2110 Multibit Error
on DIMM ##.
Reseat DIMM.
The memory module in
slot “##” has had a
multi-bit error (MBE).
See "Troubleshooting
System Memory" on
page 157.
E2111 SBE log
disabled on
DIMM ##.
Reseat DIMM.
The system BIOS has
disabled memory
single-bit error (SBE)
logging and will not log
anymore SBEs until the
system is rebooted. "##"
represents the memory
module implicated by
the BIOS.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Troubleshooting
System Memory" on
page 157.
Table 1-2. LCD Status Messages (Optional)
(continued)
Code Text Causes Corrective Actions
R415HOM.book Page 37 Friday, September 24, 2010 9:37 AM