Removing The Chassis-Intrusion Switch
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
2. Lay the system on its side, on a flat and stable surface.
3. Open the system.
4. Disconnect the chassis-intrusion switch cable from the system board.
5. Slide the chassis-intrusion switch and push it out of the chassis-intrusion switch slot.
Figure 7. Removing and Installing the Chassis-Intrusion Switch
1. chassis-intrusion switch slot
2. chassis-intrusion switch
3. chassis-intrusion switch cable
Installing The Chassis-Intrusion Switch
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and
peripherals.
2. Lay the system on its side, on a flat and stable surface.
30
To Next Page
Loading...
